DESIGN OF SMALL DUAL BAND SLOT ANTENNA dual-band antenna
Main Article Content
Abstract
This paper aims to design a slot antenna having small dimensions with dual bands, dual-band antennas allow you to connect wirelessly for tighter access to locations and are often used for devices such as cellular or dual-band wireless access points, the antenna works at 3.1 and 5.4 GHz and their geometry consists of a rectangular slit associated with the broad part of the L -shaped slot fed by a 50-ohm micro-strip line and another rectangular slit scratched at the base of the ground plane connected, the length of the first rectangular slit is set to be around 1/4λ at the lower frequency f1 = 3.1GHz, while the length of the second slit is set to be around 1/4λ at the upper-frequency f2 = 5.4GHz, the antenna printed on a 0.8 mm of FR4 substrate thickness with relative permittivity 4.4. In this paper, we simulated and designed a small dual-band slot antenna with a small size and good outcomes( the return losses s11 were -22 dB and -15 dB at frequencies 3.9 and 5.5 GHz, respectively,). The design parameters of the antenna used the transmission line model, and HFSS electromagnetic software was used for the simulation process.
Downloads
Article Details

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.