Temperature Concentration Optimization of Al₂O₃ Nanoparticles For Enhance Oil Recovery A Process Engineering And Techno-Economic Analysis

Main Article Content

mohamed Lahrash
Elsadeq Elaswod

Abstract

This study investigates the influence of temperature and Al₂O₃ nanoparticles concentration on Enhance oil recovery from Libyan sandstone core samples from an industrial engineering lens. A controlled laboratory experiment was executed using three nanoparticles’ concentrations (0.0, 0.6 and 1.2g/100ml) and five temperature levels ranged from 30°C to 70°C within a randomized 3X5 full factorial design with each treatment evaluated once at N=15 total runs. Results demonstrate a consistent improvement in recovery factor with increasing in temperature and Al₂O₃ nanoparticles dosage. Baseline waterflooding achieved recovery values between 33% and 41% whereas the introduction of Al₂O₃ nanofluids increased ultimate recovery to a range of 42% to 68%, confirming significant displacement enhancement. Response surface methodology regression analysis demonstrate a highly significant overall model of (F=60.82, df=10, p<0.001) with a significant concentration temperature interaction (P=0.0085) A second order response surface model (RSM) was developed to quantify these effect achieving high predictive accuracy (=0.9605, Adjusted R² = 0.9447, F = 60.82, p = 5.57 × 10⁻⁷).Findings confirms that Al₂O₃ assisted enhance oil recovery is highly effective for moderate temperature sandstone reservoirs, establishing an empirical basis for operational control and Techno-economic optimization.

Downloads

Download data is not yet available.

Article Details

How to Cite
[1]
mohamed Lahrash and Elsadeq Elaswod, “Temperature Concentration Optimization of Al₂O₃ Nanoparticles For Enhance Oil Recovery A Process Engineering And Techno-Economic Analysis”, SJST, vol. 8, no. 1, pp. 322–334, May 2026.
Section
Science and Technology